Cadel NICE Manual De Instalación, Uso Y Manutención página 80

ALARM CAUSE
Empty hopper
EN
The burning pot has not
been cleaned
The ignition threshold
has not been reached
Faulty ignition plug
AL 5 - FAILED
IGNITION
Too sever external
temperature
Humid pellet
Blocked thermal probe
Faulty mother board
AL 6 - NO
Empty hopper
PELLET
Boiler overheating
The ambient exchanger
fan does not work
AL 7 -
THERMAL Temporary power cut
SAFETY
Faulty manual reset
thermostat
Faulty mother board
80
SOLUTION
Fill the hopper.
Clean the burning pot.
Clean the burning pot and switch the stove on
again.
Replace the ignitor resistance.
Start the stove up again.
The pellets must be stored in a dry place. Please
check it.
Replace the thermal probe.
Replace the mother board.
Full the hopper.
Let the stove cooling. (If the problem persits please
call an Authorized Technician).
Replace the ambient fan.
The lack of tension during the running implies the
overheating of the boiler and the intervention of the
manula reset thermostat. Let the stove cooling, reset
and start the stove up again.
Replace the manual reset thermostat.
Replace the mother board.
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY
INTERVENTION