Truper EXPERT PIPI-440X Manual De Instrucciones página 14

Substances and Materials
• The unit is designed to apply covering
CAUTION
materials like paint, varnish, enamel, etc. These should
have an ignition point not lower than 70 °F. Check the
product can label or container.
WARNING • Do not spray substances you are not
familiar with and if their potential danger is unknown to
you.
WARNING • Do not spray flammable substances.
• Use care with dangers originated by the sprayed
substances. Read the text and information in the cans and
containers or the manufacturer specifications.
Before operating the unit
CAUTION • The unit shall not be used in enclosed
areas or explosive environments.
• If working outdoors consider wind direction. Wind carries
the covering to great distances, causes damages and
makes the job difficult.
• If working indoors, verify there is
CAUTION
adequate ventilation.
WARNING • The work area shall be free of any
ignition source. Do not smoke while spraying or near the
work area.
CAUTION • Wear a face mask and safety goggles
when spraying. Prevents damaging lungs and eyes.
• Wearing gloves and an overall is recommended to
protect hands and clothes from the product when
applying.
4 ENGLISH
Safety Warnings
for the Use of Spray Guns
While operating the device
• Never point the sprayer towards your
CAUTION
body, passersby or animals.
• Make sure that the equipment does not absorb any
steam solvent.
CAUTION • In the event you need to pause during
the application process, do not set the sprayer sideways.
Hold it by the hook of somewhere for it be vertical.
After operating the unit
WARNING
• When finishing the job clean the gun
perfectly to eliminate any product residue. Accumulations
can damage the gun and cancel the Warranty