Care And Cleaning - Blumfeldt Heat Square Manual Del Usuario

CARE AND CLEANING

Attention: Careful and regular maintenance of your infrared heater is
required to ensure a long and efficient operation of your appliance.
• Check the cleanliness of the reflector and IR-filament at least once a
month. If necessary, clean reflector or filament according to cleaning
instructions.
• Regular inspections must be done more frequently in dusty environments.
• Check for deformation of the reflector, wire and frame visually while
cleaning the appliance. In case of any deformation, consult a qualified
technician.
• Check the power cable and plug visually while cleaning the appliance. In
case of any deformation, consult a qualified technician.
How to Clean the Heater
1 Unplug your power cable for your safety before cleaning your appliance.
2 Take out the front grid wire through the inlets on the frame using a slotted
screwdriver.
3 The reflector and filament must be cleaned with a soft cloth, a smooth
brush or cool or dry air. The cloth may be damp but never too wet and the
cleaner should not include any chemical detergents.
4 Refrain from using cleaning materials likely to damage the reflector
(scrubbing brush, etc.).
5 Reinsert the wire grid using a slotted screwdriver.
EN
17