Bosch GBH 180-LI Professional Manual Original página 14

14 | English
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Hold the power tool firmly with both hands and make
u
sure you have a stable footing. The power tool can be
more securely guided with both hands.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS plus drill chuck
(2) SDS plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) Button for depth stop adjustment
(6) Release button for impact/mode selector
switch
(7) Impact/mode selector switch
(8) Rotational direction switch
(9) On/Off switch
(10) Handle (insulated gripping surface)
1 609 92A 525 | (19.11.2019)
A)
(11) Battery
(12) Worklight
(13) Battery release button
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Button for battery charge indicator
(17) Battery charge indicator
(18) Universal holder with SDS plus shank
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
Rated speed
– Clockwise
– Anticlockwise
A)
Impact rate
Impact energy per stroke ac-
cording to EPTA-Procedure
05:2016
Tool holder
Max. drilling diameter
B)
– Concrete
– Steel
– Wood
Weight according to EPTA-
A)
Procedure 01:2014
Permitted ambient temperat-
ure
– During charging
C)
– During operation and
during storage
Recommended batteries
Recommended chargers
A) Depends on battery in use
B) Optimum performance with driling diameter 6−10 mm
C) Limited performance at temperatures <0 °C
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-6.
A)
A)
A)
A)
GBH 180-LI
3 611 J11 1..
V= 18
-1
min 0−1800
-1
min 0−1800
-1
min 0−5100
J 2
SDS-plus
mm 20
mm 13
mm 30
kg 2.8−3.7
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V
4.0A/8.0Ah
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools