Blower Operation - Craftsman CMXEVCVVFB511 Manual De Instrucciones

Fig. 6
11. For quiet operation, install the noise
16
diffuser into the blower port
inserting the locking end of the diffuser
into the blower port
clockwise to lock into place.
12. Plug the power cord into the outlet.
Turn the motor on by flipping the on/off
switch 9 to the 'I' ON position and begin
vacuuming. Fig. 7.
Fig. 7
WARNING:
COMPLETED VACUUMING, FLIP THE ON/
OFF SWITCH TO THE 'O' OFF POSITION AND
UNPLUG THE POWER CORD FROM THE
OUTLET. O = OFF

BLOWER OPERATION

This Wet/Dry Vacuum has blowing capabilities.
To use the blower feature follow the instructions
listed.
WARNING:
SAFETY GOGGLES COMPLYING WITH ANSI
Z87.1 (OR IN CANADA, CSAZ94.3) WHEN
USING BLOWER.
1
by
1
and turning
ONCE YOU HAVE
I = ON
ALWAYS WEAR
WARNING:
CLEAR FROM BLOWING DEBRIS.
WARNING:
MASK IF BLOWING CREATES DUST THAT
MIGHT BE INHALED.
WARNING:
POWER CORD IS DISCONNECTED FROM THE
OUTLET.
CAUTION:
COLLECTION TANK IS EMPTY BEFORE
USING AS A BLOWER. CLEAR ALL DIRT AND
DEBRIS FROM THE HOSE AND COLLECTION
TANK.
13. Remove the hose
7 . Remove the noise diffuser
1
blower port .
14. Insert the larger end of the hose
the blower port
power head and lock into place. Fig. 8.
Fig. 8
15. Choose the desired accessory and insert
onto the end of the hose
Fig. 9
ENGLISH
KEEP BYSTANDERS
WEAR A DUST
VERIFY THAT THE
MAKE SURE THE
12 from the vacuum port
16 from the
12 into
1
on the back of the
12
. Fig. 9.
7