Pioneer MVH-X690BS Manual De Instrucciones página 4

Purpose
Turn on the power* Press SRC/OFF to turn on
the power.
Press and hold SRC/OFF to
turn off the power.
Adjust the volume Turn the M.C. dial.
Select a source Press SRC/OFF repeatedly.
Change the display Press DISP repeatedly.
information
Return to the previous Press BAND/
display/list
Return to the normal display Press and hold BAND/
from the menu
Answering a call Press
Ending a call Press
* When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal,
the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the
source off.
Display indication
Indication Description
Appears when a lower tier of the menu or folder exists.
Appears when a Bluetooth telephone is connected to this unit by HFP
(Hands Free Profile) (page 8) and flashes while the telephone is on hold.
Appears when a Bluetooth audio player is connected to this unit by A2DP
(Advanced Audio Distribution Profile) (page 8).
Appears when the
Appears when the sound retriever function is set (page 17).
Appears when random/shuffle play is set (except when BT AUDIO is
selected as the source).
Appears when repeat play is set (except when BT AUDIO is selected as the
source).
Appears when the iPod control function is set (page 7).
Appears when a Bluetooth connection is made (page 8).
4
En
Operation
Head Unit Remote Control
Press SRC to turn on the
power.
Press and hold SRC to turn
off the power.
Press VOLUME + or –.
Press MUTE to mute the
unit. Press again to unmute.
Press SRC repeatedly.
Press DISP repeatedly.
. Press / to select the
next/previous folder.
.
–
. Press .
. Press .
button is pressed.
Resetting the microprocessor
The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1
Press the RESET button with a pen tip or other pointed instrument.
Preparing the remote control
Remove the insulation sheet before use.
How to replace the battery
Insert the CR2025 (3 V) battery with the plus (+) and
minus (–) poles orientated properly.
WARNING
• Do not ingest the battery, Chemical Burn Hazard
(The remote control supplied with) This product contains a coin/button cell battery. If the coin/
button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to
death.
RESET button