Gardigo 78490 Manual De Instrucciones página 6

MARTEN- AND MOUSE-FREE
Instruction manual
Art.-No. 78490
Dear client,
thank you for choosing one of our quality
products. In the following, we will explain the
functions and operation of our product. Please
take the time to read through the instruc-
tions carefully. Please take some time to read
through the instructions carefully. Please note
all the included safety and operating instruc-
tions. Keep this manual safe and ensure that
you include it when passing on the product on
to a third party. If you have any questions or
suggestions about this product, please contact
your supplier or our service team.
We would appreciate it if you would recom-
mend us to others, and we hope you enjoy
using this unit.
1. Functionality
The Marten- and Mouse-Free-Device gene-
rates an acoustic signal with a frequency of
23 kHz in intervals of each 15 seconds turn-on
and turn-off time. This ultra high frequency is
sensed by the martens and mice as perturbing
and nasty, so that they flee from the corres-
ponding vehicle.
2. Assembly
The Marten- and Mouse-Free-Device is faste-
ned by means of self-tapping screws or binders
in the engine compartment on the carriage.
The connecting cable to the car battery must
be passed in that manner that it doesn't get
in contact with movable or hot parts (e.g. ven-
tilating wheel, exhaust manifold). The device
should be placed in the engine compartment
in that manner that the acoustic noise can
constantly spread and is not absorbed by in-
sulating mats.
Attention! The assembly should be
carried out by authorised specialised
staff!
3. Electrical connection
The device is directly connected to the car
battery. The black cable is connected to the
positive pole, the brown one to the negative
pole. If additionally the grey cable is connected
to clamp 15 (ignition lock, car radio) of the car
battery, the control automatically switches on
the device, when the ignition is turned off and
automatically switches it off, when the ignition
is switched on. This increases the durability of
the device, as it is only put into operation with
the motor turned off.