Assembling The Unit - Stihl RE 88 Manual De Instrucciones

English

Assembling the Unit

The following accessory parts must be
fitted before using the machine for the
first time.
Handle frame
1
2
2
Press the handle frame (1) onto the
N
holders (2) from above – handle
frame must snap into position
38
Holder for high-pressure hose
4
Position the holder (3) for the high-
N
pressure hose between the sides of
the handle frame
Press the plugs (4) through the
N
handle frame into the mounts of the
holder – the plugs must snap into
place and be inserted flush in the
handle frame
Connector on water inlet
3
Attach the connector (6) to the water
N
inlet by hand and tighten it
4
6
RE 88