Assembling The Unit - Stihl RE 109 Manual De Instrucciones

English

Assembling the Unit

The following accessory parts must be
fitted before using the machine for the
first time.
RE 109, 119
Handle
2
1
Press the handle (1) onto the
N
telescopic shafts from above
Secure the handle (1) with both
N
threaded sleeves (2) and screws (3)
Holder for high-pressure hose
Secure the holder (1) for the high-
N
pressure hose with the screws (2)
Alternatively, the holder (1) can also be
secured to the handle.
42
RE 129 PLUS
Crank for hose reel
2
1
Fit knob (1) onto crank (2).
N
Engage crank (2) into the hose reel
N
support (3)
3
Fitting the guide clip
3
Insert the guide clip (1) into the
N
supports (2), with the hose guide
facing down
Secure the guide clip (1) with both
N
screws (3)
Feed the high-pressure hose
N
2
through the hose guide (arrow)
Holder for flat hose cassette
A flat hose cassette is available as
special accessory.
Depending on the country, the flat hose
cassette holder is either included or is
available as a special accessory.
3
Fasten the holder (1) for the flat
N
hose cassette with the included
screws (2)
All versions
Connector on water inlet
3
1
Remove protective cap (1) to the
N
water inlet
Attach the connector (2) and tighten
N
it by hand
2
2
1
1
RE 109, RE 119, RE 129 PLUS
2