Selecting The Menu Language - Sony VPL-VZ1000 Manual De Referencia Rápida

Installing the Unit
The installation distance between the unit and a projection
surface varies depending on the projection size. Install this
unit so that it fits the desired projection size.
For customers
CAUTION
When mounting the projector to the ceiling or moving it to
a different location, do not do so by yourself.
For dealers
• When installing the unit on a ceiling, be sure to read
"Safety precautions for installing the unit on a ceiling" in
the Safety Regulations (supplied separately).
• When installing the unit on a ceiling, remove the feet
first, and follow the instructions below.
Screw diameter: M10
Fixing positions: 5 positions
Insertion length of screws: 10 mm - 50 mm (
2 inches)
Recommended tightening torque: 1.3 - 1.5 N•m
1
Position the unit so that the unit is parallel to the
projection surface.
Top view
2
Plug the AC power cord into the AC IN socket, then
attach the plug holder to the AC power cord.
Plug holder (supplied)
3
Slide the plug holder over the AC power cord to fix to
the unit.
6
GB
Installing the Unit
13
/
32
Projection surface
a b
a = b
AC IN socket
AC power cord
(supplied)
4
Plug the AC power cord into a wall outlet.
The unit goes into standby mode.
Tip
After connecting the AC power cord to the unit, the LED
indicator may blink.
You may not be able to control the unit while the indicator is
blinking, but this is not a malfunction. Wait until it stops
blinking.
5
Press the ?/1 (On/Standby) button to turn on the unit.
The LED indicator lights in white.
-

Selecting the Menu Language

1
Press MENU to display the menu.
2
Select the menu language.
a Press M/m to select the Setup
press , or
b Press M/m to select "
press , or
Setup
Status
Language
Menu Position
High Altitude Mode
Remote Start
Network Management
Power Saving
All Reset
c Press M/m/</, to select a language, then
press , or
3
Press MENU to turn off the menu window.
menu, then
.
Language," then
.
On
English
Bottom Left
Off
Off
Off
Standby
.