Step 5 Projecting; Projecting The Picture; Turning Off The Power; Selecting The Picture Viewing Mode - Sony VPL-VZ1000 Manual De Referencia Rápida

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Step 5

Projecting the Picture

1
Turn on both the unit and the equipment connected to
the unit.
2
Press INPUT to display the input palette on the
projection surface.
3
Select the equipment from which you want to display
images.
Press INPUT repeatedly or press M/m/
equipment.
Projects the picture from the selected equipment.

Turning Off the Power

1
Press the ?/1 (On/Standby) button.
The message "POWER OFF?" appears.
2
Press the ?/1 button again before the message
disappears.
The LED indicator turns off.
You can disconnect the AC power cord after the LED
indicator turns off.
Note
Never disconnect the AC power cord while the unit is turned on.
Tips
• You can turn off the unit by holding the ?/1 button for about 1
second, instead of performing the above steps.
• The LED indicator does not change when "Illumination" is set to
"Off" on the Installation
menu.
Projecting
to select the

Selecting the Picture Viewing Mode

With the CALIBRATED PRESET buttons, you can select
the picture viewing mode that best suits the type of video
source or room conditions.
You can save and use different preset modes for 2D/3D
respectively.
CALIBRATED PRESET buttons
Setting items
Description
CINEMA FILM 1 Picture quality suited to reproducing the
highly dynamic and clear images typical of
master positive film.
CINEMA FILM 2 Picture quality suited to reproducing the rich
tone and color typical of a movie theater,
based on the CINEMA FILM 1.
REF
A picture quality setup suitable for when you
want to reproduce faithfully the original
image quality, or for enjoying image quality,
without any adjustment.
TV
Picture quality suited for watching TV
programs, sports, concerts, and other video
images.
PHOTO
Ideal for projecting still images taken with a
digital camera.
GAME
Picture quality suited to gaming, with well-
modulated colors and fast response.
BRT CINE
Picture quality suited for watching movies in
a bright environment, such as a living room.
BRT TV
Picture quality suited for watching TV
programs, sports, concerts, and other video
images in a bright environment, such as a
living room.
USER
Adjusts the picture quality to suit your taste
then saves the setting. The factory default
setting is the same as REF.
For more information, refer to "Projecting the Picture and
Adjusting the Screen" in the Operating Instructions contained in
the supplied CD-ROM.
13
GB
Projecting

Publicidad

Tabla de contenido
loading

Tabla de contenido