Sony PFM-510A1WU Manual De Instrucciones página 21

4
Press M to set "DISPLAY" to OFF and press
ENT.
The DISPLAY function is disabled.
To activate the information function, set "DISPLAY"
to ON at the step 4 above.
Note
You can display the input signal information anytime
by pressing the DISPLAY button on the Remote
Commander, regardless of the above setting.
The input signal information list
Color system or horizontal/vertical frequency
3 1 . 5 kHz / 6 0 Hz
Signal
R G B 1 · R G B
type
Input signal Color system or horizontal/vertical
frequency display
NTSC NTSC
PAL PAL
a)
VGA (Graphics) 31.5 kHz
VGA (Text) 31.5 kHz
HDTV 33.8 kHz
Mac b) 13" 35.0 kHz
VESA c) 800×600 37.9 kHz
VESA 1024×768 48.4 kHz
Mac 16" 49.7 kHz
d)
ATI 1280×1024 64.0 kHz
Mac 21" 68.7 kHz
VESA 1280×1024 80.0 kHz
a) VGA is a registered trademark of the International
Business Machines Corporation, USA.
b) Mac (Macintosh) is a registered trademark of Apple
Computer, Inc.
c) VESA is a registered trademark of Video Electronics
Standard Association.
d) ATI is a registered trademark of ATI Technologies, Inc.
Note
When inputting the HDTV signal, input the tri-level
sync signal to the G/Y IN connector.
Actual on-screen display of the monitor status
On-screen display
31.5kHz / 60Hz (eg.) The selected input signal is
525 / 60 (eg.)
NTSC
PAL
OTHERS
NO SYNC
MUTING
RGB1 RGB
RGB1 YUV
LINE COMP
LINE Y/C
60 Hz
70 Hz
60 Hz
67 Hz
60 Hz
60 Hz
75 Hz
60 Hz
75 Hz
75 Hz
Watching the Picture
Significance
computer RGB.
The selected input signal is RGB or
component video.
The selected input signal is NTSC.
The selected input signal is PAL.
The input signal is out of the
capture range.
There is no input signal.
The sound is muted.
The signal mode of RGB1 is set to
RGB.
The signal mode of RGB1 is set to
component video.
Composite video input is selected at
LINE.
Y/C video input is selected at LINE.
21
(GB)