Information Codes - Samsung DV50K8600E Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Information codes

If the dryer fails to operate, you may see an information code on the display panel. To
determine what you should do, check the list of codes in the table below, and then try the
suggested actions.
Code
dC
FC
AC
HC
9C1
tC
tC5
dF
If any information code keeps appearing on the screen, contact a Samsung service center.
DV8700K-03170T-01_EN (US).indd 43
Action
Operating the dryer with the door open.
• Make sure the door is properly closed.
• Make sure laundry is not caught in the door.
Invalid power source frequency
• Try restarting the cycle.
• If this information code remains, contact a Samsung service
center.
Electronic control problem (Invalid Communication).
• Contact a Samsung service center.
High temperature heating check
• Clean the lint filter.
• If this information code remains, contact a Samsung service
center.(enter the line test mode)
The electronic control needs to be checked.
• Check if power is supplied properly.
• If the information code remains, contact a Samsung service
center.
The Thermistor1 resistance is very low or high.
• Check for a clogged lint screen
• Check if the vent system is restricted.
• If this information code remains, contact a Samsung service
center.
The Thermistor2 resistance is very low or high.
• Check for a clogged lint screen.
• Check if the vent system is restricted.
• If this information code remains, contact a Samsung service
center.
Incorrect door switch.
• Contact a Samsung service center.
English 43
2015-12-08
1:05:09

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dv50k8600gDv50k8600e serieDv50k8600eg serie

Tabla de contenido