Janome 9102D Manual De Instrucciones página 34

3
4
4
8
7
5, 6,7, 8
9
(1)
9
32
3
A
5
6
(2)
(2)
3. Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension discs. (If the presser foot lifter is
raised, the thread easily inserts between the
tension discs.)
3
Lower looper thread tension dial
4. Hook the thread on the corner A , and then pass
the thread through the looper thread guide.
4
Looper thread guide
5. Pass the thread through lower looper thread
guide (1).
6. Pass the thread through the looper thread
take-up lever (lower).
7. Pass the thread through lower looper thread
guide (2).
8. Pass the thread through lower looper thread
guide (3).
5
Lower looper thread guide (1)
6
Looper thread take-up lever (lower)
7
Lower looper thread guide (2)
8
Lower looper thread guide (3)
9. Turn the handwheel toward you until the
lower looper comes to the right, and pass the
threader through the hole on lower looper thread
guide (4).
Hook the end of the thread on the threader.
Looper threader is optional.
*
If you don't have the looper threader, turn the
*
handwheel towards you until the lower looper
comes to its most left position.
Thread lower looper thread guide (4) from the
left side with a pair of tweezers. Then, turn the
handwheel towards you to move the lower looper
to the right position.
9
Lower looper thread guide (4)
(1) Lower looper thread
(2) Looper threader