Oscillation Function / Swing Function; Cleaning And Care - Unold 86445 Instrucciones De Uso

For heating operation select the
desired temperature via the rotary
thermostat regulator, by turning
the regulator. The regulator is
variably adjustable. The indicator
light shows the mode.
Fan operation
Level "
(cool air)
Attention: If the appliance was
previously on heating operation,
the outflowing air will still be
warm initially. Depending on the
previous heating capacity it can
take some time until the appli-
ance provides cool air.
When you adjust the fan func-
tion, you must place the rotary

OSCILLATION FUNCTION / SWING FUNCTION

1. With this function it
is possible to distribute
the air flow over a larger
area, because the appli-
ance swings back and forth in a
specific radius.
2. The oscillation function can be
switched on in every mode. To do

CLEANING AND CARE

Switch off the appliance. To
switch off the appliance, place
the rotary regulator on position
"O" and unplug the mains plug.
Allow the appliance to cool
completely.
1. Never use any abrasive scouring
agents, steel wool, metal objects,
22
" for the fan function
thermostat regulator on the high-
est position.
5. The appliance heats until the
desired temperature is reached,
then the appliance switches off.
The appliance will switch on again
as soon as the room temperature
drops below the set temperature.
6. To switch off the appliance, place
the rotary regulator on position
"O" and unplug the mains plug.
Be aware that the appliance
can become very hot - fire ha-
zard! Particularly ensure that
children are kept away from
the appliance.
this, press the "I/O" button on the
top of the appliance.
3. If you want to stop the appliance
in a specific position, press the
"I/O" button again.
4. Switch off the oscillation function
before you switch off the appli-
ance.
hot cleaning agents or disinfec-
tants.
2. You can remove dust in the
appliance if you carefully hold a
vacuum cleaner against the air
inlet and outlet grille.
3. Store the fan heater in a dry, safe
place so that it is protected from
dust, shocks, heat and moisture.