Safety Devices; Warranty; Maintenance; Unpacking - Repacking - Metrix MX 58HD Manual De Instrucciones

Chapter II
1.3.

Safety devices

∗
The battery unit and fuses cannot be accessed without first disconnecting the measuring
leads.
∗
When measuring voltages above 24 V, the symbol blinks
∗
If the maximum range is repeatedly exceeded, an intermittent audible signal indicates the
risk of electric shock.
1.4.

Warranty

This equipment is warranted against any defects of manufacture or materials according to the
general conditions of sale.
During the warranty period (3 years), defective parts will be replaced, the manufacturer
reserving the right to repair or replace the product. In the event of the equipment being returned
to the after sale department or to a local agency, carriage to the centre shall be payable by the
customer.
The warranty does not cover the following :
•
Repairs necessitated by misuse of the equipment or use in association with incompatible
equipment.
•
Modification of the equipment or any related software without the explicit authorization of
the manufacturer.
•
Repairs necessitated by attempts to repair or maintain the product made by a person not
approved by the manufacturer.
•
Adaptation to a specific application not provided for in the specifications of the equipment
or the user manual.
•
Damage after a drop, a shock or flooding.
The contents of this manual must not be reproduced in any form whatsoever without the
consent of the manufacturer.
1.5. Maintenance and metrological verification
Return your instrument to your distributor for any work to be done within or outside the
guarantee.
1.6.

Unpacking - Repacking

This equipment has been fully checked out mechanically and electrically before shipping.
All precautions have been taken to ensure that the instrument arrives at its destination
undamaged.
However, it is advisable to carry out a rapid check for damage sustained in shipping.
If there is any evidence of damage, make this known immediately to the shipper.
Caution Should you need to return the multimeter, preferably use the original
packaging and indicate the reasons as clearly as possible on an
accompanying note.
Portable digital multimeter
on the display.
19