DeVilbiss PAP Serie Manual Del Usuario página 17

Dispositivo de presión positiva en las vías respiratorias
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ADVANCED MENU CONTROLS
With the device on, press the "Next" or "Previous" buttons on the keypad to scroll through the items on the display.
PREVIOUS ITEM
NEXT ITEM
SETTING CHANGE
Please note that the values displayed are examples only.
Patient Menu Layout
The following charts show by Mode each Display
you will scroll through using the Next or Previous
buttons on the keypad. Pressing the Down key at
the Enable Menu Display will allow you to enter
this submenu - then use Next or Previous buttons
to scroll through it; press the Up button to return to
main menu. Once the fi nal Display is reached,
pressing the Next button will return you to the fi rst
Display.
NOTE-If the unlocked symbol is shown, you are
able to adjust this setting. If the locked symbol is
shown, this setting can only be adjusted by your
provider.
NOTE: There are 5 levels of SmartCode.
Use up  or down  key to change
between levels.
SE-DV57-1
k
Pressing this button displays the previous menu option.
j
Pressing this button displays the next menu option.
h
These buttons allow you to adjust the setting that is shown on the display.
i
CPAP Mode
Adherence Score
P:10.0 FLX
CPAP
Heat:5
P:10.0 S–T RR:15
I/E: 1:1.0 (50%)
LK:123 S–S EV:AS
MV:123.4 VT:1234
Set Pressure
Set Pressure
10.0 cmH2O
Delay Time
20 minutes
Delay Pressure
Delay Pressure
4.0 cmH2O
Tubing Length
1.8 m (6 ft)
SmartFlex Menu
Press 
Enable Menu
Enable Menu
Press 
LCD Contrast Adj
LCD Contrast Adj
50%
Compliance Meter
Compliance Meter
123456.7 hours
Firmware Version
V0.01 30/11/2010
Serial Number
Serial Number
MD000005
83% (25/30)
SmartCode
SmartCode
1-Day
1-Day
B6CD-37F-35M2
Heater setting shown if DV5HH is
attached, FLX shown if SmartFlex
feature is turned on.
SmartFlex
3
SmartFlex Mode
SmartFlex Mode
Full-Time
SmartFlex IRnd
3
SmartFlex ERnd
3
Exit Menu
Exit Menu
Press 
UP () BUTTON
DOWN () BUTTON
Auto-OFF
Disabled
Auto-ON
Auto-ON
Enabled
Mask Fit Check
Enabled
Low Backlight
Enabled
Exit Menu
Exit Menu
Press 
EN - 17

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Sleepcube dv57

Tabla de contenido