Seat Pad Assembly (Certains Models) - Graco Dynamo Lite Classic Connect Manual Del Propietário

3.4 Seat Pad Assembly
(on certain models)
Step 1.
Wrap bottom edge of seat pad
around the foot end of seat as
shown.
Step 2.
Wrap the top edge of the seat pad
around the head end of the seat
as shown.
Step 3.
On side of seat, wrap elastic strap
around the handle as shown.
Skip Steps 3 and 4 if your model
does not include straps.
Step 4.
Fasten strap to hook that is
attached to the seat pad. Repeat
steps for the elastic strap and
hook on the other side of the seat
pad.
13
13 13 13 13 13 13