Descargar Imprimir esta página

DURAVIT P3 Comforts Instrucciones De Montaje página 4

Inodoro monopieza, single flush
Ocultar thumbs Ver también para P3 Comforts:

Publicidad

Idiomas disponibles

Idiomas disponibles

Important information
Regarding the mounting instructions
These mounting instructions come as part of the Duravit
product and should be read carefully prior to installation.
Explanation of the key words and symbols
Indicates a hazardous situation which,
CAUTION
if not avoided, could result in minor
or moderate injury.
Is used to address practices not
NOTICE
related to physical injury.
Inspection (e.g. for scratches)
Check for leaks and leak-tightness
Target readership and qualifications
The toilet must be installed by certified plumber.
Risk of physical injury, product
CAUTION
damage or potential damage!
> Local installation regulations and any country-specific
standards must be observed at all times.
Safety information
Risk of personal injury or breakage
CAUTION
through fragile product!
> 2 people are recommended of handling.
> Handle with care.
NOTICE
Risk of product damage!
> Overtightening may cause breakage or chipping of
vitreous china.
> Handle with care.
NOTICE
Risk of external leakage!
> Do not lift or rock the toilet after placement.
> If you break the watertight seal, you must install a new
wax seal.
4
MAL_57073/17.04.2
Water installation
HET (high efficiency toilet):
• with single flush: 1.28 gpf / 4.8 Ipf
Operation pressure:
Recommended: 25 – 80 psi / 172 – 550 kPA
Installation information
Please read pre-installation datasheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.

Publicidad

loading

Este manual también es adecuado para:

2175.1..85