Before You Begin; Tools And Parts Needed; Parts Included; Before The Installation - Gaggenau DV 463 710 Instrucciones De Instalación

Before you begin

B e f o r e y o u b e g i n
Heavy load
Requires 2 people to carry

Parts included

Before the installation

Notes
▯ A pump that contains oil is installed in the appliance.
If the incline is too great, this oil may flow out of the
pump. Do not tip the appliance or upend it.
Use a suitable tool to remove the transport locks and
▯
install the oil filter.
Do not move the appliance if the transport locks for
▯
the pump are not installed. The oil from the vacuum
pump may leak out when it is tipped or tilted, and may
damage the appliance. When uninstalling the
appliance, re-attach the transport locks before moving
it.

Tools and parts needed

Torx head screwdriver
▯
▯ Flat-head screwdriver
Pencil
▯
Pliers
▯
▯ Tape Measure
Carefully lift the appliance out of the packaging 1a.
1.
2.
Remove the transport lock for the pump from the top
of the appliance 1b.
The transport lock can be secured to the rear of the
appliance for future use 1c.
Install the oil filter 1d.
3.
4.
Place the lid into the opening and move it to the left
1e.
Remove the transport lock screws 1f.
5.
en-us
Before you begin
5