Ideal 61-614 Manual De Instrucciones página 2

ND 1723-2 61-614 Instructions
• Before each use:
- Zero out the test leads in the resistance mode to verify the functionality of
the battery and test leads.
- Verify meter operation by measuring a known voltage. Apply meter to
circuit under test. And, test on a known live voltage again to ensure proper
operation.
• Remove test leads from input jacks prior to removing back of case.
• Only replace the fuse with specified volt, amp, and rupture speed ratings.
CAUTION
To protect yourself, think "Safety First":
• Voltages exceeding 30VAC or 60VDC pose a shock hazard so use caution.
• Use appropriate personal protective equipment such as safety glasses, face
shields, insulating gloves, insulating boots, and/or insulating mats.
• Use the 3 Point Safety Method.
• Never ground yourself when taking electrical measurements.
• Connect the black common lead to ground before applying the red test lead to
voltage. Disconnect the red test lead from the voltage first.
• Always work with a partner.
• When using the probes, keep fingers as far behind the probe tips as possible.
• Do not expose meter to mechanical shock, vibration, extreme temperature, or
strong magnetic fields.
Features:
• Measures AC/DC Voltage, DC Current, Resistance, and Battery Check
• Mirrored scale to reduce parallax error
• Integrated tilt stand and carry hanger
• Fuse protected for safety
• Diode protected meter movement
• High-impact thermoplastic case
• Test leads have banana plug type jacks for added safety.
1/9/07 9:48 AM Page 2