Locating A Station By Name; List-Up; Other Functions; Labelling The Rotary Commander - Sony XR-C7300 Manual De Instrucciones

Erasing the station name
1
Tune in any station and press (LIST) for
two seconds.
2
Press (DSPL) for two seconds.
3
Rotate the dial to select the name that
you want to erase.
4
Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 3 and 4 if you want to erase
other names.
5
Press (LIST) for two seconds.
The unit returns to normal radio reception
mode.
Locating a station by
name

— List-up

1
Press (LIST) momentarily.
The name assigned to the current station
appears in the display.
2
Press (LIST) repeatedly until you find the
desired station.
3
Press (5) (ENTER) to tune in the desired
station.
Note
Once the station name or frequency has been
displayed for five seconds, the display goes back to
its normal mode. To turn off the display, press
(DSPL).

Other Functions

You can also control the optional CD or MD
units with the rotary commander.
Labelling the rotary
commander
Depending on how you mount the rotary
commander, attach the appropriate label as
shown in the illustration below.
L IS T
M O D E
S O U N D
S O U N D
M O D E
L IS T
11