Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 53
ingredients must be at the left
side.
9.
Place the motor block (1) on the
transparent lid (2) and make sure,
that the drixe axle (3) fits into the
opening of the mixer and that the
power contact with the compres-
sor housing (5) is established.
10. Put the plug into a power socket
and press the button ON/OFF to
start the appliance. The display
shows „50:00" an. The appliance
is ready for operation.
11. Select the desired freezing time
by repeated pressing of the button
ZEITWAHL/Time select in steps of
10 minutes (10, 20, 30, 40 or 50
minutes).
12. Press the START/STOP button.
After a few seconds, the appli-
ance starts mixing. The green
control light is turning on.
13. Approx. 2 minutes later the free-
zing is turned on and the red con-
trol light turns on.
14. The display shows alternatingly
the remaining preparationt ime
and the actual temperature of the
cooling bowl.
15. During operation, the appliance
can be stopped at any time by
pressing the START/STOP button
for at least 2 seconds.
16. During operation the freezing time
can be extendeed by pressing the
time select button (Zeitwahl) in
steps of 5 minutes up to a max.
freezing time of 50 minutes.
17. The appliance turns off automa-
tically after the preselected time.
Ten beeps will sound. The display

CLEANING

Switch off and unplug the
appliance. Let the appliance
cool down.
1.
Do not clean the appliance, the
motor block and the cord in or
under water or any other liquid.
shows „0:00". The ice cream can
be taken out.
18. If the ice cream is still too soft,
you can restart the appliance by
pressing the START/STOP button
for at least 2 seconds. Select the
desired additional freezing time
with the time select button (Zeit-
wahl). Then press the START/
STOP button. The appliance will
restart for the preselected time
and will then return into the ini-
tial mode.
19. If the ice is not taken out within
10 minutes after the beeps, the
automatic freezing function is
activated to avoid the ice cream
from melting.
20. This function cools the ice cream
in steps of 10 minutes for max.
one hour. Then the appliance
returns into the starting mode.
21. Switch off and unplug the appli-
ance before taking out the ice
cream.
22. To take out the ice cream first
remove the motor block und then
the transparent lid by turning it
counterclockwise.
23. Take the ice cream bowl out and
remove the mixer from the ice
cream.
24. Fill the ice cream into an appro-
priate freezing container with lid.
Do not use any sharp tools, but
preferably plastic or wood spoons
or spatulas.
25. You can now prepare new ice-
cream, just restart at point 1 of
this chapter.
2.
Do not use any sharp or scouring
cleansers which might damage
the surface.
3.
All removable parts except the
motor block can be cleaned in
warm soapy water. The parts are
not dishwasher proof.
23

Publicidad

Tabla de contenido
loading

Tabla de contenido