Marta MT-2668 Manual De Instrucciones página 8

BUTTONS INSTRUCTION
ON/OFF button:
You can switch the machine on and off by one pressing of the button.
ION button:
You can switch the ionization mode on and off by one pressing of the button.
Max/min button:
Select mist release intensity by pressing consequently the button Max/min.
<1> -low intensity (violet indication), <2> -medium intensity (green indication), <3> -high intensity (blue indication).
OPERATION INSTRUCTION

First Operation, put unit in the room temperature for half of an hour before running.
 It is recommended to use the unit under temperature of 20 degree C, relative humidity less than 80％RH.

Use clear water not over 40 degree C

Check the water basin, make sure it is clear.

Connect the power plug and switch on the unit (NEVER RUN THE UNIT WHEN THERE IS NO WATER IN WATER BASIN), the main connection lamp will be on. The unit starts working.
INSTRUCTIONS TO USAGE:

Put the machine on a flat surface.

Take the water tank out of the unit, open the water tank cover and fill the tank with clear water. Close the cover and put the tank onto the base unit carefully..
 Put the nozzle and top cover into the socket on top of the water tank.

Check if the rated voltage meets the input voltage, and plug into the socket
 Touch the machine button On/OFF
 Touch MIN/MAX intencity button
 Touch the ION button to start or stop the ionization function.

Once the water in the basin is too little to keep the machine working, the machine will automatically alarm 3 seconds and then stop working. The water tank background light of red LED. Refill the
water, and the machine will restart.
.
, it have low, middle, high mist for your adjustment.
8
MT-2668