Fitting The Harness - Stihl HL 94 Manual De Instrucciones

Fitting the Harness

Some versions of the machine can be
carried on a shoulder strap.
The type and style of the shoulder strap
depend on the market.
Shoulder Strap
3
Put on the shoulder strap (1).
N
Adjust the length of the strap.
N
With the power tool attached, the
N
carabiner (3) must be at about the
same height as your right hip.
HL 94, HL 94 K
Attaching Machine to Shoulder Strap
1
2
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube –
hold the carrying ring steady.
1
Disconnecting Machine from Shoulder
Strap
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Throwing Off the Machine
WARNING
The machine must be quickly thrown off
in the event of imminent danger.
Practice removing and putting down the
machine as you would in an emergency.
To avoid damage, do not throw the
machine to the ground when practicing.
Practice quickly detaching the power
tool from the carabiner as described
under "Disconnecting Machine from
Shoulder Strap".
2
If you are using a shoulder strap:
Practice slipping the strap off your
1
shoulder.
1
2
English
19