Fitting The Harness; Balancing The Machine - Stihl FS 111 RX Manual De Instrucciones

Opening the threaded filler cap
Turn the cap counterclockwise until
N
it can be removed from the tank
opening.
Remove the filler cap.
N
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the threaded filler cap
Position cap.
N
Turn the cap clockwise as far as it
N
will go and tighten it as securely as
possible by hand.
FS 111 RX

Fitting the Harness

The type and style of the
harness/shoulder strap depend on the
market.
The use of the harness is described in
the chapter on "Approved Combinations
of Cutting Attachment, Deflector, Handle
and Harness".
Shoulder Strap
1
2
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is level with your
right hip when the machine is
attached.

Balancing the Machine

N
Balancing the Machine
Attaching Machine to Harness
The type and style of the harness or
shoulder strap and carabiner depend on
the market.
2
1
2
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
3
Loosen the screw (3).
N
English
1
19