Manual Settings - GYS GYSPOT ARCPULL 350 Manual Del Usuario

WELDING IN MANUAL MODE
In Manual Mode, times,currents, coefficients for the different welding phases and the lifting height of the insert need
to be set by the user.
To increase or decrease the arc duration (value
To increase or decrease the arc current (value
To change the other synergistic welding parameters (materials, type and size of insert, gas) refer to the chapter «Manual
Settings».
MAIN MENU
To access the Main Menu from the Synergic or Manual modes, press the button Menu/Validate
M ai n M enu
> Set t i ngs
M anual M ode
Conf i gur at i on
Press the return button
SYNERGIC SETTINGS
Syner gi c Set t i ngs
> M at er i al > Fe
Gas ON
El ect r ode Ri ng
THK. el ec. 1. 5 m m

MANUAL SETTINGS

M anual Set t i ngs
St ar t - up > Q = 0
Pressing the Menu/Validate button
screen.
Press the return button
GYSPOT ARCPULL 350
t
100
Arc duration
t
m s
100
t I
m s A
), use the keys D+ and D-.
100 100
zone de
message
zone de
message
Press the keys G+ and G- to move the section cursor. Select the section by pressing the
button Menu/Validate
•« Settings » access the welding settings (synergic or manual).
• « Manual Mode » / « Synergic Mode» change the welding mode on the machine (synergic
mode <-> manual mode)
• « Configuration » gives access the advanced settings on the machine (language, gas
options, information, etc.)
to return to the welding screen.
Press the keys G+ and G- to move the left cursor (Material, Gas, Type and thickness of the
insert). Press the keys D+ and D- to modify the values of each item.
Pressing the Menu/Validate button
chine to the synergy welding screen.
Press the return button
Press the keys G+ and G- to browse the different values (arcing and attachment coeffi-
cients, duration, currents, height) of the drawn arc process (see chapter «Drawn arc wel-
ding process»).
Press the keys D+ and D- to modify the values (coefficients, duration, current, height).
confirms the manual settings and returns the machine to the manual welding
to ignore the settings and return to the Main Menu.
I
m s A
350
Arc current
message
area
I
), use the keys G+ and G-. A
100
.
confirms the synergy settings and returns the ma-
to ignore the settings and return to the Main Menu.
EN
25