Troubleshooting - Danby Designer DUF167A3WDD Manual Del Propietário

TROUBLESHOOTING

Hours of operation:
Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time
Friday 8:30 am - 4:00 pm Eastern Standard Time
Information in this manual is subject to change without notice.
PROBLEM
No power
Internal temperature not cold enough
Appliance runs continuously
Internal temperature is too cold
Noises
Danby Consumer Care: 1-800-263-2629
• A fuse may be blown or the circuit breaker
• Plug not fully inserted into the wall outlet
• Temperature setting is too warm
• Door is not shut properly or opened excessively
• Exhaust vent is obstructed
• Recently added a large quantity of warm food
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
• Temperature setting is too cold
• Door not shut properly or opened excessively
• Exhaust vent is obstructed
• Recently added a large quantity of warm food
• Close proximity to heat source or direct sunlight
• Ambient temperature or humidity is very high
• Temperature setting is too cold
• Parts are expanding and/or the refrigerant is
7
POSSIBLE CAUSE
tripped
to the cabinet
to the cabinet
circulating; this is normal