YUNEEC MANTIS G Guia De Inicio Rapido página 5

First Flight Part 1
1.Installing the Smart Device
Pull out the Install the
phone holder smart phone
2.Power On
To power on the Mantis G and the remote controller, press
and hold the power button for two seconds until you hear
two rising tones.
Power on the Mantis G
Connect the smart phone
with the remote controller
(
Iphone and Android cable
not included)
Power on the controller
3.Connecting to Mantis G
• Launch Yuneec Pilot App.
• Tap the scan icon on the App screen and follow on-screen
instructions to connect the aircraft with your control device
(or manually select Mantis Wi-Fi in phone settings and
enter the password to complete the connection. The pass-
word can be found on the aircraft QR Code sticker).
4.Take Off
• To ensure safe flight, step back approximately 9ft
(3m) behind the Mantis G.
Option 1
Tap the icon [ ] on the app and then slide to take off.
Option 2
• Move the sticks for 1.5 seconds as shown below to
start the motors.
• Slowly raise Left Stick to take off.
Start the motors
Take off