Getting Started; Step 1: Charging The Battery Pack - Sony Handycam HDR-XR500 Guía De Operaciónes

Getting started

Step 1: Charging the battery pack

Battery pack
AC Adaptor
You can charge the "InfoLITHIUM" battery pack (H series) after attaching it to your
camcorder.
You cannot attach any "InfoLITHIUM" battery pack other than the H series to your camcorder.

1
Turn off your camcorder by retracting the viewfinder and closing the LCD
screen.
2
Attach the battery pack by sliding it in the direction of the arrow until it
clicks.
3
Connect the AC Adaptor and the power cord (mains lead) to your
camcorder and the wall outlet (wall socket).
Align the  mark on the DC plug with that on the DC IN jack.

The /CHG lamp lights up and charging starts. The /CHG lamp turns off when the
battery pack is fully charged.
4
When the battery is charged, disconnect the AC Adaptor from the DC IN
jack of your camcorder.
DC IN jack
DC plug
Power cord (mains lead)
ACCESS lamp
(hard disk)
/CHG lamp
To the wall outlet (wall socket)
US
1