Getting Started; Step 1: Charging The Battery Pack - Sony HANDYCAM HDR-SR10 Guía De Operaciónes

Getting Started

Step 1: Charging the battery pack

4
Battery pack
You can charge the "InfoLITHIUM"
battery pack (H series) after
attaching it to your camcorder.
b Notes
• You cannot attach any "InfoLITHIUM" battery
pack other than the H series to your camcorder.
1
Connect the AC Adaptor to the
DC IN jack on the Handycam
Station.
Be sure that the v mark on the DC plug
is facing up.
2
Connect the power cord (mains
lead) to the AC Adaptor and the
wall outlet (wall socket).
3
Turn the POWER switch in the
direction of the arrow to OFF
(CHG) (the default setting).
US
8
5
DC IN jack
DC plug
5
3
1
2
AC Adaptor
Power cord (Mains lead)
4
Attach the battery pack by sliding
it in the direction of the arrow
until it clicks.
5
Set the camcorder onto the
Handycam Station securely.
The /CHG (charge) lamp lights up and
charging starts. The /CHG (charge)
lamp turns off when the battery pack is
fully charged. Remove the camcorder
from the Handycam Station.
To remove the battery pack
Turn the POWER switch to OFF (CHG).
Slide the BATT (battery release) lever and
remove the battery pack.
BATT (battery release) lever
/CHG lamp
POWER switch
To the wall outlet
(wall socket)