Coway AP-1012GH Instrucciones Del Propietario página 12

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANINg METHOD
- Always unplug the product before cleaning the filter.
- The pre-filter is reusable by removing dust or cleaning it with water.
- If the pre-filter is not cleaned for a long time, the product performance may deteriorate.
Tips
- Deodorization filter and True HEPA filter cannot be cleaned and reused. Never clean
them with water.
Cleaning the Pre-Filter (every 2 ~ 4 weeks)
1. Open the front cover by pulling the
lower part of it.
2. Press down on the top clip of the pre-filter and pull it out.
-
To prevent dust from falling off, remove the filter carefully
without exerting a shock.
3. Clean the Pre-filer with a vacuum cleaner or with water
depending on the level of contamination.
4. Install the Pre-filter after removing the moisture completely. Fit the
front cover back to the product.
-
When refitting the Pre-filter to the product, fit it in the hook
correctly.
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido