Preparations; How To Install Filter - Coway AP-1012GH Instrucciones Del Propietario

PREPARATIONS

Please Check Before use!
The product is for 120 V~, 60 Hz only.
Make sure to connect the power plug to a grounded electric outlet
(120 V~, 60 Hz) dedicated to the product.

How to Install Filter

- Make sure to remove each filter's plastic packing before installing filters.
- The product is for household use. Use the product indoors only.
- When the product is not in use, remove the power plug from the electric outlet.
Tips
- When installing filters, make sure that filter direction is correct (Front/Back).
► Order of filters : Pre-filter → Deodorization Filter → True HEPA Filter
1. Open the front cover.
- Open the front cover by pulling
the lower part of it.
2. Take out filters and remove the
plastic packing.
- Remove the plastic packing of
the filters and install the filters by
proper order.
7