Operation; Place The Specimen On The Stage; Lamp Settings; Focus Adjustment - VWR VisiScope MSL100 Serie Manual De Instrucciones

LOCK SCREW
LED LIGHT
ILLUMINATOR
BRIGHTNESS
ADJUSTMENT KNOB

Operation

Place the specimen on the stage

Turn the observation head to a comfortable position for observation. Lock the specimen slide on the mechani-
cal stage using the slide clip. Ensure that the specimen is centred over the stage opening by adjusting the
coaxial knobs of the stage.

Lamp settings

The microscope is fitted with white LED illuminator. Before turning on the light, read the section 5.3 about
electrical safety precautions. Insert the plug of the cable into the power socket and turn on the switch on the
back of the main body. Turn the brightness adjustment knob to a brightness suitable for observation.

Focus adjustment

Rotate the coarse focusing knob to bring the slide into focus using an objective with a low magnification.
Adjust the fine focusing knob to get is in focus, turn the nosepiece to choose the objective you need.
CARRYING HANDLE
MAIN CABLE
ON-OFF SWITCH
6