List Of Materials; Parts Supplied; Parts Not Supplied; Dimensions And Clearances - ELICA LI30TA Guía De Instalación, Uso Y Mantenimiento

List of Materials

Parts supplied

Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
WARNING!
Remove the protective film covering the product before putting
into operation.
• Hood canopy assembly with blower, transition.
• 2 Halogen lamps.
• 2 Grease filters.
• Duct cover.
• Hardware bag with:
• Template.
• Duct cover support bracket (1 piece)
• Use, care and installation guide
• Wood screws (6 pieces - 5 x 45)
• Assembly screws
- 2 (2.9 x 6.5)
- 2 (3.5 x 9.5)
• Hood attachment anchors screws
- 2 (8 x 40)
- 4 (10 x 50)

Dimensions and Clearances

1½"
(4 cm)
7¼" (18.4 cm
8 1 / " (20.7 cm
8
30" (76.2cm)
36" (91.2 cm
5

Parts not supplied

Optional Accessories
• Ductless Recirculating Kit
To be used only in the Ductless (Recirculating) version
includes: 2 charcoal filters and deflector
• Professional Stainless Steel Grease filter
Tools/Materials required
• Wire nuts
• Tape to mount template
• 6" rounded metal duct length to suit installation
• Measuring tape
• Pliers
• Gloves
• Knife
• Safety glasses
• Electric drill with 5/16" and 3/8" Bits
• Strain relief
• Spirit level
• Duct tape
• Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
• Wire cutter/stripper
• Masking tape
• Hammer
• Saw, jig saw or reciprocating saw
6" *Ductless (Recirculating) version Only
**Ducting version Only
*28 7 /
*42 1
**28
**38" (96.6 cm) max
24 1 / "
8
(61 cm)
10"
(25.4 cm)
21½" (54.7 cm)
" (73.3 cm) min
8
/ " (106.9 cm) max
16
3 / " (72 cm) min
8