Special Features - Etac Immedia IM53NS Instrucciones De Uso

Notice

Special features

Always check the product before use and after washing.
Never use a defective product. If the product shows signs
of wear-and-tear, it must be scrapped.
Read these instructions carefully.
It is important that carers receive instruction in manual
handling. Etac offers advice and training for carers. For further
information, contact Etac.
Always use the correct manual handling techniques.
Encourage the user to assist where possible.
To ensure that the user feels safe and that every manual handling
is smooth, always plan the manual handling in advance.
Material and cleaning
Material:
Positioning Wedge: Polyurethane foam.
Cover: Polyester, polyurethane.
The product should be checked regularly, preferably each time
it is used, and especially after washing.
Check that there is no damage to seams or fabric.
Never try to repair a product yourself.
Never use a defective product.
There is a risk that the user may slide off. Never leave
the user alone on the edge of the bed.
Never leave the product on the floor.
Always conduct a risk assessment, and ensure that the
assistive product can be used for the individual user
and, in combination with other devices, that it is safe
for the user and carers.
If in any doubt - please contact Etac.
Washing instructions:
Remove foam before washing.
Do not use fabric softener.
This product can be cleaned with a solvent-free cleaning agent
with a pH level between 5 and 9, or a 70% disinfection solution.
6