Finish Cooking; Locking The Controls; Using The Dual Zone Function - EAS ELECTRIC EMCH200-4F Manual De Instrucciones

3.3.2 Finish cooking

Turn the cooking zone off by scrolling down to " 0 " or touching
"-" and "+" control together
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces
"H" will show which cooking zone is hot to touch. It will disappear when the surface has cooled down
to a safe temperature. It can also be used as an energy saving function if you want to heat further pans,
use the hotplate that is still hot.

3.3.3 Locking the Controls

 You can lock the controls to prevent unintended use (for example children accidentally turning the
cooking zones on).
 When the controls are locked, all the controls except the ON/OFF control are disabled.
Touch the lock control
When the hob is in the lock mode, all the controls are disable except the
,
ON/OFF you can always turn the ceramic hob off with the ON/OFF
control in an emergency, but you shall unlock the hob first in the next
operation.

3.3.4 Using the Dual zone function

• The function only work in 4# cooking zone
• The dual cooking zone has two cooking areas that you can use a central section and an outer section. You
can use the central section (A) independently or both sections (B) at once.
To lock the controls
To unlock the controls
Make sure the ceramic hob is turned on
Touch and hold the lock control
The timer indicator will show " Lo "
for a while.
10
OR
V.2