How To Use; Start Cooking; Finish Cooking - EAS ELECTRIC EMCH029-2F Manual

Ocultar thumbs Ver también para EMCH029-2F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.

3.3 How to use

3.3.1 Start cooking

After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that
the ceramic hob has entered the stat of standby mode.
Touch the ON/OFF control. all the indicators show "-"
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control
Select a heat setting by touching the "-" or "+" control.
• If you don't choose a heat setting within 1 minute, the
ceramic hob will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during
cooking.
• By holding down either of these buttons, the value will
adjust up or down.

3.3.2 Finish cooking

Touching the heating zone selection control that you wish
to switch off
9
V.1

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido