Home Decorators Collection 51591 Guía De Uso Y Mantenimiento página 11

Assembly - Hanging the Fan (continued)
5
Attaching the fan blades
NOTE: The blades must be installed before attempting to operate
the fan. If the blades are not installed, the motor will not function
properly
□
Attach a blade (F) to blade bracket (J) using the decorative
nuts (CC) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(F) and the blade bracket (J) and into the decorative nut (CC).
Repeat for the two remaining holes in the blade (F).
□
Tighten each screw (AA) securely.
□
Repeat these steps for the remaining blades.
Assembly - Attaching the Accessories
1
Installing the shade
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
□
Place the shade (G) into the light kit (pre-installed), aligning
the three flat areas on the top flange of the shade (G) with the
three raised dimples in the light kit (pre-installed). Turn the
shade clockwise until it stops.
J
11
Please contact 1-800-986-3460 for further assistance.
E
AA
CC
E
G
HOMEDEPOT.COM/HOMEDECORATORS
F