Home Decorators Collection 51591 Guía De Uso Y Mantenimiento página 14

Operating Your Fan and Remote Control
4. Timer
□
Pressing the timer button will automatically turn fan and light (if light is on) off after 2, 4, or 8 hours. When you activate the
timer mode, the LED to the left of the time above the clock will illuminate.
Off 2H
5. Fan reverse button (Must be pushed when the fan is in operation)
□
Warm weather: LED bar will illuminate and the lights will flow from high to low.
□
Cool weather: LED bar will illuminate and the lights will flow from low to high.
6. Light
□
Press and release the light button to turn the light on or off
□
Light on: The fan memory function will resume the light setting (on or off and dim)
on the fan prior to the power being turned off.
7. Dimmer.
□
Press to increase the desired light level.
□
Press to decrease the desired light level.
Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan.
Speed setting for warm or cool weather depend on factors such as the
room size, ceiling height, number of fans and so on.
A. Warm weather - (Forward) A downward airflow creates a cooling
effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
NOTE: Do not wait for the fan to stop before pressing the reverse button.
The fan will not reverse direction if the fan is not moving.
4H 8H Disables timer
14
A. Warm weather
B. Cool weather