Troubleshooting - Skil PWRCORE 20 RS5825B-00 Manual Del Propietário

TROUBLE SHOOTING
Problem
Tool will not start
The blade binds,
jams, or bums the
wood.
The saw vibrates or
shakes
18
Cause
1. The battery pack charge is
depleted.
2. Tool is over-loaded.
3. The battery pack is over
temperature.
4. The battery pack is not installed
properly.
5. The switch is burned out.
1. The blade is dull.
2. An improper blade is being used. 2. Choose the correct blade for
3. The blade is warped.
1. The blade is damaged.
2. The blade is loose.
Remedy
1. Charge the battery.
2. Release the on/off switch and
try again.
3. Turn off the tool and cool the
battery pack under air flow.
4. Confirm that the battery is
locked and secured to the
tool.
5. Have the switch replaced by
an Authorized SKIL Service
Center or Service Station.
1. Replace the blade.
your operation.
3. Replace the blade.
1. Replace the blade.
2. Remove the blade and
reinstall it.