Modelling Light (Ml) - Metz MECABLITZ 15 MS-1 digital Manual De Instrucciones

11 Modelling Light (ML)

The modelling light (setting light) is a
high frequency, stroboscopic flash
light. The effect of a quasi continuous
light is created for a duration of
approx. 2 seconds. The setting light
can be used to assess the light distri-
bution and shadow formation before
taking a picture.
Activating the modelling light
• Switch-on flash unit with the main
switch .
• Keep the button "AF/SELECT"
pressed until the following message
appears in the display:
• Press the button S E L
unit. In the display appears:
• Switch-on (ON) the "MODELLING
LIGHT" function with the button
• Press OK button and the "Modelling
Light" function is switched to the
preset operating mode.
15MS-1
S E L E C T
S E L
M O D E L L I N G
on the flash
L I G H T
O N
O F F
S E L
M O D E L L I N G
L I G H T
O F F O N
S E L
• As a confirmation that the
"Modelling Light" is switched on,
the manual release button
Triggering modelling light
Press the manual release button
trigger the modelling light.
The modelling light is generated
according to the possibly set ratio of
the reflectors (Ratio).
Deactivating modelling light
• Keep the button "AF/SELECT"
V 1 . 0 pressed until the following message
appears in the display:
• Press the button
⊃
unit. In the display appears:
• Switch-off (OFF) the "MODELLING
OK
LIGHT" function with the button
• Press the button and the model-
OK
OK ling light function is deactivated.
blinks.
to
S E L E C T
M O D E L L I N G
S E L on the flash
O F F
M O D E L L I N G
O F F
.
⊃
S E L
L I G H T
O N
S E L
OK
L I G H T
O N
S E L
OK
83