Publicidad
Step 6
Fasten the HALF DISKS (GG) to the LOWER PLINTHS (DD).
å
Use three BROWN 1" FLAT HEAD SCREWS (12S).
Fasten three BRACKETS (17G) to the LEFT END (B) and
å
LEFT UPRIGHT (F2). Use three BLACK 9/16" LARGE
HEAD SCREWS (1S).
Fasten a LOWER PLINTH (DD) to the LEFT END (B). Use
å
two BLACK 9/16" LARGE HEAD SCREWS (1S).
Use bottom hole
GG
DD
17G
BLACK 9/16" LARGE HEAD SCREW
(5 used for the BRACKETS)
Page 12
Be sure the END MOLDING is
centered on the HALF DISK (GG).
B
1S
The larger hole
should be facing up.
GG
DD
17G
422002
GG
DD
DD
12S
BROWN 1" FLAT HEAD SCREW
(3 used for the HALF DISKS)
F2
www.sauder.com/services
GG
Publicidad
