Black 1-1/4" Flat Head Screw - Sauder Palladia 422002 Manual Del Usuario

Step 12
Fasten the LOWER PLINTHS (DD) to the BRACE (J). Use four
å
BLACK 1-1/4" FLAT HEAD SCREWS (7S).
Fasten the BASE (K) and BOTTOM MOLDING (BB) to the
å
BRACE (J). Use four BROWN 1" FLAT HEAD SCREWS (12S).
Flat end
DD
BB
Page 18

BLACK 1-1/4" FLAT HEAD SCREW

(4 used for the LOWER PLINTHS)
J
K
DD
Be sure the END MOLDING is
centered against the HALF DISK
on the LOWER PLINTH (DD).
7S
BROWN 1" FLAT HEAD SCREW
(4 used for the BASE and MOLDING)
422002
Don't worry. It isn't
Rome. This can be built
in a day.
12S
www.sauder.com/services