Using Compression And Bass Emphasis; Using Its Playlists - Pioneer DEH-P6100BT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Available accessories
Using compression and bass
emphasis
You can only use these functions with a multi-
CD player that supports them.
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
1
Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
2
Use MULTI-CONTROL to select
COMP/DBE in the function menu.
# If the multi-CD player does not support
COMP/DBE, NO COMP is displayed when you at-
tempt to select it.
3
Press MULTI-CONTROL to select your fa-
vorite setting.
OFF—COMP1—COMP2—OFF—DBE1—
DBE2

Using ITS playlists

ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
Creating a playlist with ITS programming
1
Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2
Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
3
Use MULTI-CONTROL to select ITS-M in
the function menu.
4
Select the desired track by pushing
MULTI-CONTROL left or right.
5
Push MULTI-CONTROL up to store the
currently playing track in the playlist.
COMPLETED is displayed and the currently
playing selection is added to your playlist.
6
Press BAND/ESC to return to the play-
back display.
Note
After data for 100 discs is stored in memory, data
for a new disc will overwrite the oldest one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player begin to play.
1
Select the repeat range.
Refer to Playing tracks in random order on
page 19.
2
Display the function menu.
Refer to Introduction to advanced operations
on the previous page.
3
Use MULTI-CONTROL to select ITS-P in
the function menu.
4
Press MULTI-CONTROL to turn ITS play
on.
ITS-P appears in the display. Playback begins
of those tracks from your playlist within the
previously selected MCD or DISC ranges.
# If no tracks in the current range are pro-
grammed for ITS play, then EMPTY is displayed.
# To turn ITS play off, press MULTI-CONTROL
again.
Erasing a track from your ITS playlist
You can delete a track from your ITS playlist if
ITS play is on.
1
Play the CD with the track you want to
delete from your ITS playlist, and turn ITS
play on.
Refer to Playback from your ITS playlist on this
page.
Section
12
55
En

Publicidad

Tabla de contenido
loading

Tabla de contenido