Calling A Number In The Phone Book; Using The Missed, Received And Dialed Call Lists - Pioneer DEH-P6100BT Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using Bluetooth wireless technology
Calling a number in the phone
book
While this unit and your cellular phone are
being connected, the phone book of this unit
is automatically synchronized with that of the
cellular phone. However, the synchronization
may not be performed depending on the type
of cellular phone. In this case, you will need to
set up the phone book manually. To set up the
phone book, see the following section. Trans-
ferring entries to the phone book on the next
page.
After finding the number you want to call in
the phone book, you can select the entry and
make the call.
1
Press PHONE/
/BT MENU to switch to
the phone number list mode.
# If TELEPHONE is selected as the source, press
/LIST to switch to the phone number list mode.
2
Use MULTI-CONTROL to select
PHONE BOOK.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select the first
letter of the name you are looking for.
# You can also perform the same operation by
pushing MULTI-CONTROL up or down.
# The order of the first name and last name may
be different from that of the cellular phone.
4
Press MULTI-CONTROL to display en-
tries.
The display shows the first Phone Book entry
starting with that letter (e.g. "Ben", "Brian"
and "Burt" when "B" is selected).
5
Turn MULTI-CONTROL to select a phone
book entry you want to call.
# You can also perform the same operation by
pushing MULTI-CONTROL up or down.
6
Press MULTI-CONTROL to display the
phone number list of the selected entry.
# You can also display the phone number list of
the selected entry by pushing MULTI-CONTROL
right.
# You can scroll literal information by pressing
and holding DISP/SCRL. To stop scrolling, press
DISP/SCRL.
# If several phone numbers are included in an
entry, select one by turning MULTI-CONTROL.
# If you want to go back and select another
entry, push MULTI-CONTROL left.
7
Press MULTI-CONTROL to make a call.
8
To end the call, press PHONE/
BT MENU.
Using the missed, received and
dialed call lists
The 80 most recent calls dialed, received, and
missed are stored in memory. You can browse
them and call numbers from these lists.
1
Press PHONE/
/BT MENU to switch to
the phone number list mode.
# If TELEPHONE is selected as the source, press
/LIST to switch to the phone number list mode.
2
Use MULTI-CONTROL to select
MISSED CALLS, DIALED CALLS or
RCVED CALLS.
Turn to change the menu option. Press to se-
lect.
3
Turn MULTI-CONTROL to select a phone
number.
Turning MULTI-CONTROL to change the
phone numbers stored in the list.
# You can also change the phone number by
pushing MULTI-CONTROL up or down.
# You can switch the name and phone number
by pressing DISP/SCRL.
# You can scroll literal information by pressing
and holding DISP/SCRL. To stop scrolling, press
DISP/SCRL.
Section
08
/
35
En

Publicidad

Tabla de contenido
loading

Tabla de contenido