Displaying The Radio Id; Using Instant Replay Function; Hd Radioä Tuner; Basic Operations - Pioneer DEH-P6100BT Manual De Instrucciones

Section
12 Available accessories
4 Press MULTI-CONTROL to switch to that
station to listen to the game.
Notes
! If you have not made any team selections,
NOT SET is displayed.
! When games involving your favorite teams are
not currently playing, NO GAME is displayed.

Displaying the Radio ID

If you select 000, the ID code is displayed.
% Push MULTI-CONTROL left or right to
select 000.
Note
To select 000, set the channel select setting to
CH NUMBER. About the channel select setting,
refer to Selecting the SIRIUS channel select mode
on page 50.

Using Instant Replay function

Following functions can be operated during
the Instant Replay mode.
! To use this function, Pioneer SIRIUS bus in-
terface (e.g. CD-SB10) is required.
! To use this function, SIRIUS plug-and-play
unit with Instant Replay Function is re-
quired.
! For details, refer to SIRIUS plug-and-play
unit's manuals.
% Performing the Instant Replay mode
When SIRIUS tuner is selected as the source,
press and hold S.Rtrv/SAT MODE.
# In the following conditions, tuner exits from
the Instant Replay mode.
— When BAND/ESC is pressed
— When another source is selected
% Selecting a track
Push MULTI-CONTROL left or right.
52
En
% Fast forwarding or reversing
Push and hold MULTI-CONTROL left or right
for about one second and release.
HD Radioä tuner

Basic Operations

You can use this unit to control an HD Radio
tuner (e.g. GEX-P20HD), which is sold sepa-
rately.
For details concerning operation, refer to the
HD Radio tuner's operation manual.
% Selecting a band
Press BAND/ESC.
# Band can be selected from among FM1, FM2,
FM3 or AM.
% Manual tuning (step by step)
Push MULTI-CONTROL left or right.
% Seeking tuning
Push and hold MULTI-CONTROL left or right,
and then release.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
Storing and recalling broadcast
frequencies
The operation is the same as that of the tuner.
(Refer to Storing and recalling broadcast fre-
quencies on page 15.)

Switching the display

Desired information can be displayed.
% Press DISP/SCRL.
Press DISP/SCRL repeatedly to switch between
the following settings:
Broadcast frequency/station name—artist
name—song title—program type
# Only when the tuner has been tuned in to an
HD Radio broadcasting, display can be changed.