Using Disc Title Functions - Pioneer DEH-P6100BT Manual De Instrucciones

Section
12 Available accessories
2 Display the function menu.
Refer to Introduction to advanced operations
on page 54.
3 Use MULTI-CONTROL to select ITS-M in
the function menu.
4 Select the desired track by pushing
MULTI-CONTROL left or right.
5 Push MULTI-CONTROL down to erase
the track from your ITS playlist.
The currently playing selection is erased from
your ITS playlist and playback of the next track
begins.
# If there are no tracks from your playlist in the
current range, ITS EMPTY is displayed and nor-
mal playback resumes.
6 Press BAND/ESC to return to the play-
back display.
Erasing a CD from your ITS playlist
You can delete all tracks of a CD from your ITS
playlist if ITS play is off.
1 Play the CD that you want to delete
from your ITS playlist, and turn ITS play
off.
2 Display the function menu.
Refer to Introduction to advanced operations
on page 54.
3 Use MULTI-CONTROL to select ITS-M in
the function menu.
4 Push MULTI-CONTROL down to erase
all tracks on the currently playing CD from
your ITS playlist.
All tracks on the currently playing CD are de-
leted from your playlist and DELETED is dis-
played.
5 Press BAND/ESC to return to the play-
back display.

Using disc title functions

You can input CD titles and display the titles.
Then, you can easily search for and play a de-
sired disc.
56
En
Entering disc titles
Use the disc title input feature to store up to
100 CD titles (with ITS playlist) into the multi-
CD player. Each title can be up to 10 charac-
ters long.
For details concerning operation, refer to En-
tering disc titles on page 20.
! Titles remain in the memory even after the
disc is removed from the magazine, and
are recalled when the disc is reinserted.
! After data for 100 discs is stored in mem-
ory, data for a new disc will overwrite the
oldest one.
Displaying disc titles
The operation is the same as that of the built-
in CD player.
Refer to Displaying text information on disc on
page 17.
Selecting discs from the disc title list
Disc title list lets you see the list of disc titles
entered in the multi-CD player and select one
of them to play back.
1 Press /LIST to switch to the disc title
list mode during the playback display.
2 Use MULTI-CONTROL to select the de-
sired disc title.
Turn to change the disc title. Press to play.
# You can also change the disc title by pushing
MULTI-CONTROL up or down.
# When playing CD TEXT disc, push
MULTI-CONTROL right to see a list of the tracks
in the selected disc. Push MULTI-CONTROL left
to return to the disc list.
# If no title is entered for a disc, NO DISC TITLE
is displayed.
# NO DISC is displayed next to the disc number
when there is no disc in the magazine.
# If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.