Remote Control - HQ-Power VDPLB310BL Manual Del Usuario

5. Overview
Refer to the illustrations on page 2 of this manual.
1 power input + fuse
2 DMX input
3 on-off button
6.

Remote Control

Refer to the illustrations on page 2 of this manual.
key step 1
blackout
1
auto
2
3 sound
strobe
4
speed
5
sensitivity
6
%
7
manual
8
fade
9
RGBAUVW
10
11 +/-
0-9
12
7. Installation
Choose a suitable mounting spot. Connect the power cord to the mains and switch on [3]. Switch off and
disconnect after use.
Mounting the Device

Have the device installed by a qualified person, respecting EN 60598-2-17 and all other applicable
norms.

The carrying construction must be able to support 10 times the weight of the device for 1 hour
without deforming.

The installation must always be secured with a secondary attachment e.g. a safety cable.

Never stand directly below the device when it is being mounted, removed or serviced. Have a
qualified technician check the device once a year and once before you bring it into service.

Install the device in a location with few passers-by that is inaccessible to unauthorised persons.
V. 00 – 18/11/2014
step 2 step 3
any key
+/-
speed +/-
strobe +/-
% +/-
+/-
sensitivity +/-
strobe +/-
% +/-
+/-
+/-
+/-
+/-
+/-
RGBAUVW +/-
strobe +/-
% +/-
+/-
+/-
speed +/-
strobe +/-
% +/-
+/-
strobe +/-
function +/-
strobe
% +/-
VDPLB310BL
4 LCD + control panel
5 DMX output
6 power output
Auto programme mode
Sound mode
Dimmer
Auto programme speed
Sensitivity for sound mode
Manual RGBAUVW mode
Display current value
Value setting
Strobe speed
Fading mode
Manual colour selection
6
description
©Velleman nv