System Setup - Phonocar VM 206 Manual De Instrucciones

GB
Digital TV
1. Move the cursor to Saturation option, Press VOL+ key to move the cursor into the Properties list on the
right.
2. Press CH+/- key to move cursor upward to choose and press OK key to confirm; move the cursor onto
the options on the left, values will be as the ones you selected.
3. Saturation can be set as: 0-12; "Update succeeds".
4. Default:0.
5. Press OK key to save set, the system will hint with "Update succeeds".
System Set up
System set up menu provide convenient system set up, via menu (MENU
-Configuration-System Set up) you can enter System Set up menu. In System Set up menu. (1). Press
CH+/- key to move the cursor upward and downward to choose option. (2).When the cursor stays on the
option: Press VOL+/- key to
EQ Setup
To set output sound effect default: standard
Surround
To set stage effect default: OFF
Active Antenna
Select "on" to turn on the 5V supply to active
antenna, if ANT shorted circuit , ANT power supply will turn off
automatically, select OFF for Non-Active antenna.
LCN
If you turn on the LCN (logic channel NO.) function and the DVB-T program included LCN information, then
the channel NO. will display the LCN channel NO. only after auto channel scan. LCN channel list is usually
defined by program vender or broadcaster.
Area
To set scanning area , choose area to download preset channel Germany/England/Italy/France/Spain/
Holand/Taiwan/China/ Norway/Sweden/Finland supported, depending on different version.
Time
Via menu (MENU-Digital TV-Configuration time) you can set Timer Mode in Time page: Timer Mode: set time
mode, Date: set date, Time: set time, GMT Off set: set GMT Off set, Summer Time: set summer time.
In time menu, there are two time modes, one is Auto setting: revise via setting GMT Offset, Summer Time
options; the other is Manual setting: revise via setting Date, Time options. When the Cursor moves onto
33